Description
BFTCO VINTAGE CUSTOM HANDLE KIT WITH CHROME PLATED METAL REEL SEAT WOOD REAR GRIP & MUSHROOM BUTT CAP
This is a Berinson Fishing Tackle Company Custom Handle Kit that includes a high quality vintage chrome plated metal reel seat that has a trigger on it and is 4 7/8 inches long and has an inside diameter of 13/16 of an inch, a select hardwood rear grip that is 8 inches long that has a 9/16 inch hole that goes about 6 inches into the handle almost to the end where the mushroom butt cap presses on, a 9/16 inch diameter wood dowel that is 6 inches long and a mushroom butt cap that is pressed onto the end of the wood rear grip 4 pieces all together in this custom handle kit. The overall length of the handle is 13 1/2 inches long which includes the wood rear grip, the chrome plated metal trigger reel seat and the mushroom butt cap.
These handle components are the same as those used on many vintage fishing rods from the 1930s to the 1960s. They are designed to provide many years of dependable service. We recommend using two-part epoxy glue when attaching the wood dowel to the inside of the wood rear grip and to the inside of the chrome plated metal reel seat. You just use rings of masking tape around the wood dowel so it press fits into the end of the wood handle and press fits inside the end of the reel seat. Then you use two-part epoxy glue to have everything permanently attached together. Then your fishing rod blank is inserted into the end of the reel seat using a ferrule on the end of the blank or you can build up the end of the blank so it press fits into the inside of the reel seat and have it permanently attached again using two-part epoxy glue. This Berinson Fishing Tackle Company Custom Handle Kit can be used for a bait casting rod or a conventional rod as the possible applications.
